N.Y.C. Jeep Club Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

ok guy's and gal's our membership application and due's for 2016 will be collected .you can down load print and fill out and bring to the next meet and greet's
If you will not be at the next meet and greet please PM me and i will give you my mailing address

Pages: [1]   Go Down

Author Topic: Direction/advice-tj build  (Read 126 times)

0 Members and 1 Guest are viewing this topic.

nispudsck

  • NYCJC Member
  • Forum Newbie
  • *****
  • Offline Offline
  • Posts: 5
    • View Profile
Direction/advice-tj build
« Reply #-1 on: May 22, 2018, 06:50:15 PM »

So I started building my 04 TJ. Going to be used to wheel occasionally, but I want to keep it streetable to take back and forth to work every now and then. Baby #1 is due in 4 weeks so needless to say I'm on a budget. I swapped in some jk coils for lift, new to me 35s, SYE, and rear trackbar bracket. I'm trying to figure out what my next step is. Do I tackle the stock axles or lock the front and wait until they blow up.

Any suggestions on next steps?
Logged
Nick Sperduti #187
04 TJ

MichaelRom

  • Forum Admin
  • Forum Member
  • *****
  • Offline Offline
  • Posts: 2,787
  • Club Vice President - Member #102
    • View Profile
Re: Direction/advice-tj build
« on: May 23, 2018, 06:28:47 AM »

Yea  lock the front and see how hard you wheel. You should be fine for a while  for an occasional wheeling
Logged
2011 jku rubicon, black

nispudsck

  • NYCJC Member
  • Forum Newbie
  • *****
  • Offline Offline
  • Posts: 5
    • View Profile
Re: Direction/advice-tj build
« Reply #1 on: May 25, 2018, 09:34:28 PM »

That's what I was leaning towards. Is it worth trying to find a set of axles from a 4 banger with 4.10 gears? Or are they not going to work?
Logged
Nick Sperduti #187
04 TJ
Pages: [1]   Go Up